willettfx
Usuarios
Fresh Boarder
| Mensajes: 2 |   |
Karma: 1
|
MY ANIMATRONIC PROJECT FINISHED!!! - 2007/08/12 20:48
Well , The animatronic took me over 2 years to make.And its 2 projects in 1.I
filmed the entire process of making the animatronic. I shot 93 hours of DV tapes
My animatronic Mod Has no A.I. But maybe one day. Im programming
the 16 servo movements into the PC and press the play to play the movements a lip
sync routine.
The problems was mainly the cost . Wanted to upgrade my animatronic 's computer
but couldnt . I wish I would have spend more money on my servos .There was times
that I look at cost than torque. Which cost me more money in the long run .Also
the oven ,I had to build an oven to bake the foam rubber, My 2nd oven 3'x 3'x
3 'plywood box with foil insulation with a single burner and PC case fan for
air circulation . And I baked the foam for 11 hours. But the 1st oven was to small
2x'2x'2' box ,The mold fit in this oven .But there was no air circulation
and foam rubber skin failed .You need the air circulation to bake foam rubber.
I just wanted to say Thank You to all on this forum,And Thank You thebestcasescenario.com
for allowing me to post here.
When uncovered ,Here is 32 feet of servo cable.
The only thing connecting to the PC and the Animatronic is a modular cable (Looks
like a phone cable).
Which is plug into a modular adapter that plug into the PC's serial port .
The end of the modular cable plug in Mini SSCII Serial Servo Controller.
Thank You Guys
Gary Willett
WILLETTFX
www.willettfx.com
|
Foros... 
Fuente RSS de Conscious Robots
